Fulcrum (scissors action) version E1:
Fully open the tips are 30mm apart.

Closing force 5N.

data sheet

E2 is similar to E1 but has short jaws for the user to attach own fingers.

Closing force 5N.

data sheet

Ideal replacement for a pneumatic gripper.
Stroke: 22mm; open 22mm, closed 0mm.
Gripping force: 5N.
Closes in only 200mS or less depending on size of object.
The customer can make fingers to suit the product and attach to the gripper jaws or use our fingers design service..

data sheet

Small pneumatic grippers suitable for R12 using SMC MHZ2-10D (approx 6mm stroke).
Larger pneumatic grippers for R17, R19 using SMC MHZ2-16D (approx 8mm stroke).
Includes pneumatic fittings on the robot, isonic valve and cable.
The customer can make fingers to suit the product and attach to the gripper jaws or use our fingers design service..

Suitable when compressed air is not available. The customer can add fingers. to suit the product and attach to the gripper jaws.
Stroke: 12.5mm (1/2 inch) (6.25mm per finger)
Gripping force: 20N
Closing speed: 500mS or less depending on size of object being gripped.
data sheet

Available for all models, configured to suit the application.
The unique R12 version is created using 3D printing and is it's own manifold with internal airways.
Supplied with Venturi and valve ready for use.

data sheet, R12 version
data sheet, R17 version